# /host/lapl/etc/pccard.conf # Warning: Automatically copied to my web page. # http://www.berklix.com/~jhs/hardware/toshiba/libretto/etc/pccard.conf # /etc/defaults/pccard.conf: irq 3 5 10 11 15 irq 10 11 15 # irq 3: Although generic 4.10 kernel does not show irq 5 in use, if ep0 # ethernet tries to use it, performance is sticky & often drops out # completely for long periods, So I guess sound electronics uses it. # irq 5: dmesg shows "sio1 at port 0x2f8-0x2ff irq 3 on isa0" # irq 15: I suspect the cdrom via pcmcia might need 15 ? # All the other IRQs generic dmesg shows (other than 3 listed above) # ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 # atkbd0: flags 0x1 irq 1 on atkbdc0 # psm0: irq 12 on atkbdc0 # sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 # sio1 at port 0x2f8-0x2ff irq 3 on isa0 # ppc0: at port 0x378-0x37f irq 7 on isa0 # ep0: <3Com Etherlink III 3C589> at port 0x240-0x24f irq 11 slot 0 on pccard0